Click here to view an Adobe print preview...

Feed & Wash Table Chains

Combination chains

1- Combination S1

CHAIN PITCH ALLOW. U.T.S. PIN SIDEBAR MAX BARREL      
NO.   LOAD   DIA. DEPTH GEARING DIA.      
  P     D A G B C K T
C131 3.07 3,220 27,500 0.62 1.50 1.13 1.25 3.25 4.00 0.38
C102B 4.00 4,200 27,500 0.62 1.50 1.75 1.00 3.75 4.50 0.38
C111 4.76 6,000 36,000 0.75 1.75 2.25 1.44 4.38 5.25 0.38
C110 6.00 4,200 27,500 0.62 1.50 1.75 1.25 4.25 5.00 0.38
C132 6.05 10,000 60,000 1.00 2.00 2.88 1.72 5.00 6.00 0.50
C132 6.05 10,000 60,000 1.00 2.00 2.88 1.72 8.00 9.00 0.50
C132 6.05 10,000 60,000 1.00 2.00 2.88 1.72 10.00 11.00 0.50

 

Attachment Data
S1 attachments are one piece sides flame cut to close limits to ensure maximum strength and accuracy.  Standard practice is to supply these in pairs but single S1’s can be supplied.

K2 attachments maybe used in this application and are available on request.

A comprehensive range of other attachments are available for these chains which are supplied mainly to elevator applications.

Eccentric Barrels
The above Ewart Combination Chains have eccentric barrels.  The extra thickness occurs on the pitch line at the outer ends of the centre link.  This ensures the leading barrel is clear of the sprocket tooth face.  The elimination of severe sliding contact under heavy pressure reduces the extent of the wear, to which, block links of symmetrical barrel design are prone.

 

 

 

 

 

 

Forged Rivetless

101-RIVETLESS

CHAIN PITCH ALLOW. U.T.S. PIN SIDEBAR MAX.
NO.   LOAD   DIA. DEPTH GEARING
  P     D A G
348 3.031 2,400 24,000 0.50 1.13 0.74
458 4.031 3,000 48,000 0.62 1.38 1.06
468 4.031 7,000 68,000 0.75 1.88 1.81
678 6.031 8,500 85,000 0.87 2.00 1.25
698 6.031 13,000 136,000 1.10 2.53 1.53
998 9.031 13,000 136,000 1.10 2.66 1.53

 

 

 

 

Bar Link Chains

105-BARLINK

CHAIN PITCH ALLOW. U.T.S. PIN INNER SIDE OUT. SIDE MAX.  
NO.   LOAD   DIA. DEPTH DEPTH GEARING  
  P     D A A1 G T
S3699 6.031 6,000 130,000 1.12 2.50 2.88 1.56 0.50
B5283 6.031 6,400 136,000 1.12 2.50 2.69 1.63 0.50

 

Welded Steel Chains

106-WELDED CHAIN

CHAIN PITCH ALLOW. U.T.S. PIN SIDEBAR MAX. BUSH  
NO.   LOAD   DIA. DEPTH GEARING DIA.  
  P     D A G B T
WH78 2.609 3,500 30,000 0.50 1.13 1.13 0.88 0.25
WH82 3.075 4,400 36,000 0.56 1.25 1.25 1.06 0.25
WH111 4.760 8,850 91,000 0.75 1.75 2.00 1.25 0.38
WH124 4.000 7,200 69,000 0.75 1.50 1.50 1.25 0.38
WH132 6.050 15,300 115,000 1.00 2.00 2.88 1.75 0.50

Note:  WH indicates all parts are thru-hardened.

H1 attachments

112-WELDED H1

CHAIN PITCH      
NO.        
  P C F X
H78 2.609 3.50 2.42 1.13
H82 3.075 3.37 2.62 1.56

 

111-WELDED SPUR
Can be supplied as a separate welded on piece to standard sidebar

CHAIN PITCH ALLOW. U.T.S. PIN SIDEBAR MAX. BUSH    
NO.   LOAD   DIA. DEPTH GEARING DIA.    
  P     D A G B C X
W124 4.000 6,200 47,000 0.75 1.50 1.50 1.25 3.25 4.00
W132 6.050 13,000 78,000 1.00 2.00 2.88 1.75 5.00 6.00

A number of additional attachments are available on request including the 
A22 / A42 lug type attachment.

 

Steel Chains Pusher Type

51-PUSHER ATT

CHAIN PITCH ALLOW. U.T.S. PIN SIDEBAR MAX. BUSH      
NO.   LOAD   DIA. DEPTH GEARING DIA.      
  P     D A G B C T X
S82 3.075 4,300 35,000 0.62 1.50 1.37 1.19 5.19 0.25 5.94
SS102B 4.000 6,300 40,000 0.62 1.50 2.13 1.00 3.75 0.38 4.50
SS110 6.000 6,300 40,000 0.62 1.50 2.13 1.25 4.25 0.38 5.50
B5298 6.000 6,550 90,000 0.75 2.38 1.55 1.38 5.00 0.38 6.19
B5143 135MM 5,575 55,000 0.75 2.00 1.50 1.10 4.88 0.31 5.88

52-PUSHER ATT

CHAIN PITCH ALLOW. U.T.S. PIN ROLLER SIDEBAR MAX. BUSH        
NO.   LOAD   DIA. DIA. DEPTH GEARING DIA.        
  P     D R A G B C F T X
SS39 3.075 4,650 48,000 0.62 1.25 1.50 1.50 0.88 1.75 0.66 0.31 2.50

53-PUSHER ATT

CHAIN PITCH ALLOW. U.T.S. PIN ROLLER SIDEBAR MAX. BUSH        
NO.   LOAD   DIA. DIA. DEPTH GEARING DIA.        
  P     D R A G B C F T X
B5296 6.000 7,400 90,000 0.88 2.75 2.00 1.50 1.25 5.00 1.75 0.38 6.00

54-PUSHER ATT

CHAIN PITCH ALLOW. U.T.S. PIN ROLLER SIDEBAR MAX. BUSH        
NO.   LOAD   DIA. DIA. DEPTH GEARING DIA.        
  P     D R A G B C F T X
B5070 4.000 6,300 40,000 0.69 2.75 2.00 2.00 1.00 3.88 2.23 0.25 4.88

55-PUSHER

CHAIN PITCH ALLOW. U.T.S. PIN SIDEBAR MAX. BUSH       BOLT    
NO.   LOAD   DIA. DEPTH GEARING DIA.       DIA    
  P     D A G B C E F H T X
B5099 4.000 9,500 75,000 0.75 2.00 2.62 1.44 3.25 2.25 4.16 0.50 0.38 5.50

56-PUSHER

CHAIN PITCH ALLOW. U.T.S. PIN ROLLER SIDEBAR MAX. BUSH        
NO.   LOAD   DIA. DIA. DEPTH GEARING DIA.        
  P     D R A G B C F T X
B5047 3.075 5,100 70,500 0.65 1.25 1.56 1.50 0.91 4.75 2.56 0.38 5.53

61-PUSHER

CHAIN PITCH ALLOW. U.T.S. PIN ROLLER SIDEBAR MAX. BUSH      
NO.   LOAD   DIA. DIA. DEPTH GEARING DIA.      
  P     D R A G B C T X
B5191 150MM 6,200 82,500 0.88 66MM 2.19 1.25 1.25 3.5 0.31 4.59

 

Steel Chains – AS2 Type

60-BUSHED AS2

CHAIN PITCH ALLOW. U.T.S. PIN SIDEBAR MAX. BUSH       BOLT      
NO.   LOAD   DIA. DEPTH GEARING DIA.       DIA.      
  P     D A G B C E F H T W X
B5111 4.760 8,860 75,000 0.75 2.00 2.62 1.44 4.76 3.50 5.00 0.50 0.38 4.00 2

2-CRANKEDAS2

CHAIN PITCH ALLOW. U.T.S. PIN ROLLER SIDEBAR MAX. BUSH       BOLT      
NO.   LOAD   DIA. DIA. DEPTH GEARING DIA.       DIA.      
  P     D R A G B C E F H T W X
B5276 6.050 5,900 60,000 0.75 2.63 2.00 1.38 1.00 4.40 3.25 4.50 0.50 0.38 3.38 2.00

Steel Chains – A2 Type

109-A2 ATTACH
Note: Welded Angle Attachment

CHAIN PITCH ALLOW. U.T.S. PIN ROLLER SIDEBAR MAX. BUSH       BOLT      
NO.   LOAD   DIA. DIA. DEPTH GEARING DIA.       DIA.      
  P     D R A G B C E F H T W X
6022 6.000 3,875 22,000 0.56 65MM 1.50 1.31 0.92 2.44 2.00 80MM 0.38 0.25 52MM 80MM

Steel Chains – K2 Slat Type Feed Tables

18-ROLLERK2

CHAIN PITCH ALLOW. U.T.S. PIN ROLLER SIDEBAR MAX. BUSH       BOLT      
NO.   LOAD   DIA. DIA. DEPTH GEARING DIA.       DIA.      
  P     D R A G B C E F H T W X
0904 4.00 4,850 40,000 0.69 2.00 1.75 1.22 1.00 1.25 1.44 2.63 0.38 0.31 3.50 4.13
09060 6.00 6,350 60,000 0.75 2.75 2.00 1.50 1.13 1.63 3.00 4.50 0.50 0.38 4.38 6.75
09061 6.00 6,350 85,000 0.75 2.75 2.25 1.50 1.13 1.63 3.00 4.50 0.50 0.38 4.38 6.50
1796 6.00 7,500 100,000 0.87 2.75 2.25 1.50 1.25 1.63 3.00 4.50 0.50 0.38 4.38 6.50
SS2198 6.00 7,650 100,000 0.87 2.75 2.25 1.50 1.25 1.63 3.00 4.50 0.50 0.50 4.38 5.94
09063 6.00 8,300 140,000 0.94 3.00 2.38 1.50 1.25 1.75 3.00 4.50 0.50 0.41 4.38 6.50

Block Link Chains
Lug Only Attachment

6-BLOCKLINK-LUG

CHAIN PITCH ALLOW. U.T.S. PIN SIDEBAR MAX. BUSH       BOLT      
NO.   LOAD   DIA. DEPTH GEARING DIA.       DIA.      
  P     D A G B C E F H T W X
E30200 200MM 2,850 90,000 0.75 1.75 1.00 1.12 15MM 100MM 65MM 20MM 0.31 2.00 2.88

Slotted Centre

107-BLOCK-SLOTTED CENTRE

CHAIN PITCH ALLOW. U.T.S. PIN SIDEBAR MAX. BUSH      
NO.   LOAD   DIA. DEPTH GEARING DIA.      
  P     D A G B C F T
BL09060 6.00 4,400 60,000 0.75 2.00 40MM 1.12 28mm 75mm 0.38
BL09063 6.00 7,200 140,000 0.94 2.38 55mm 1.25 29mm 73.5mm 0.41

H Class Pintle Chains

122-PLAIN PINTLE

CHAIN PITCH ALLOW. U.T.S. PIN SIDEBAR MAX. BUSH
NO.   LOAD   DIA. DEPTH GEARING DIA.
  P     D A G B
H78 2.609 2,380 16,000 0.50 1.13 1.13 0.88
H82 3.075 3,080 20,000 0.56 1.25 1.25 1.22

H2 Attachment

110-H78 H2-1

CHAIN PITCH      
NO.        
  P C F X
H78 2.609 3.50 2.42 1.13
H82 3.075 3.37 2.62 1.56

The tabular dimensions and weights are approximate and are not binding.
Design improvements may result in variation from the published figures and verification is recommended.
 Click here to view an Adobe print preview...