Ewart Chain - Crate conveyor chains

Dairy chains

CC600 Plain chain
Drawing 243
243 - CC600 PLASTIC

CHAIN	PITCH	ALLOW.	U.T.S.	PIN	SIDEBAR			MIN.
NO.		LOAD		DIA.	DEPTH			TURN
	P			D	A	B	X	RAD.
CC600	2.500	1,850	3,400	0.44	1.13	1.13	1.63	30

Note: Both snap fit and circlip pin styles are available

CC600 Plain chain with S pusher attachment
Drawing 244

244 - CC600 PUSHER

C	F	T	X	Z
2.20	3.87	0.38	2.44	0.19


Attachments facing outwards	Attachments facing inwards

These pusher attachments can be fitted either inwards or outwards, as shown above, and are fitted to the outer faces of the standard CC600 chain, at any interval along its length. It can only be used on straight running acetal chains, utilising an extended circlip pin.

CC600 D chain
Drawing 245
245 - CC600D

CHAIN	PITCH	ALLOW.	U.T.S.	PIN	SIDEBAR					MIN.
NO.		LOAD		DIA.	DEPTH					TURN
	P			D	A	B	T	X	Z	RAD.
CC600D	2.500	1,850	3,400	0.44	1.13	1.13	0.67	1.65	2.12	30

Note: Both snap fit and circlip pin styles are available

CC600 F chain
Drawing 246
246 - CC600F

CHAIN	PITCH	ALLOW.	U.T.S.	PIN	SIDEBAR				MIN.
NO.		LOAD		DIA.	DEPTH				TURN
	P			D	A	B	X	Z	RAD.
CC600F	2.500	1,850	3,400	0.44	1.13	1.13	1.62	0.22	30

Note: Both snap fit and circlip pin styles are available

CC600 DB chain
Drawing 247
247 - CC600DB

CHAIN	PITCH	ALLOW.	U.T.S.	PIN	SIDEBAR					MIN.
NO.		LOAD		DIA.	DEPTH					TURN
	P			D	A	B	T	X	Z	RAD.
CC600DB	2.500	1,850	2,900	0.44	1.14	1.14	0.58	1.69	2.05	30

Note: This chain is supplied with knurled pins only

1700 chain
Drawing 256
256 - 1700

CHAIN	PITCH	ALLOW.	U.T.S.	PIN	SIDEBAR					MIN.
NO.		LOAD		DIA.	DEPTH					TURN
	P			D	A	F	T	X	Z	RAD.
1700	1.968	790	1320	0.31	0.94	3.16	0.13	2.15	0.44	5.5

Note: Only snap fit pins are available with this chain

50mm chain
Drawing 253
253 - 50mm PLAIN

CHAIN	PITCH	ALLOW.	U.T.S.	PIN	SIDEBAR			MIN.
NO.		LOAD		DIA.	DEPTH			TURN
	P			D	A	F	X	RAD.
50 mm	1.968	1,320	2,200	0.31	0.98	3.16	2.10	5.50

Note: Both snap fit and knurl pin styles are available

50mm open top chain
Drawing 254
254 - 50mm OPEN TOP

CHAIN	PITCH	ALLOW.	U.T.S.	PIN	SIDEBAR			MIN.
NO.		LOAD		DIA.	DEPTH			TURN
	P			D	A	F	X	RAD.
50 mm	1.968	1,320	2,200	0.31	0.98	3.16	2.10	5.50

Note: Both snap fit and knurl pin styles are available

50mm chain with pusher attachment
Drawing 255
255 - 50mm PUSHER

CHAIN	PITCH	ALLOW.	U.T.S.	PIN	SIDEBAR				MIN.
NO.		LOAD		DIA.	DEPTH				TURN
	P			D	A	F	X	Z	RAD.
50 mm	1.968	1,320	2,200	0.31	0.98	3.16	2.10	0.59	5.50

Note: Both snap fit and knurl pin styles are available

Ventilated modular slat chain
Drawing 240
240 - VMS

CHAIN	PITCH	ALLOW.	U.T.S.	PIN	SIDEBAR
NO.		LOAD		DIA.	DEPTH
	P			D	A	C	L
VMS	1.170			0.16	0.62	0.18	6.00

Ventilated modular slat chain with pusher attachment
Drawing 241
241- VMS PUSHER

CHAIN	PITCH	ALLOW.	U.T.S.	PIN	SIDEBAR
NO.		LOAD		DIA.	DEPTH
	P			D	A	C	L	X
VMS PUSHER	1.170			0.16	0.62	0.18	6.00	0.92

Note: the straight running VMS slat chain can be arranged to travel in either direction.
These 6" wide modular units, incorporating a 0.16" (4mm) dia. Stainless steel pin, can be joined to produce a maximum total width of 54".

Ventilated modular slat transfer plate
Drawing 242


L	T	X
6.00	0.18	4.92

Malleable

CC600/CC625 chain
Drawing 228
228 - CC600

CHAIN	PITCH	ALLOW.	U.T.S.	PIN	SIDEBAR			MIN.
NO.		LOAD		DIA.	DEPTH			TURN
	P			D	A	B	X	RAD.
CC600	2.500	1,500	12,500	0.44	1.13	1.13	1.69	21
CC625	2.520	1,500	12,500	0.44	1.13	1.13	1.69	21

CC600 D chain
Drawing 229
229 - CC600D

CHAIN	PITCH	ALLOW.	U.T.S.	PIN	SIDEBAR					MIN.
NO.		LOAD		DIA.	DEPTH					TURN
	P			D	A	B	T	X	Z	RAD.
CC600D	2.500	1,500	12,500	0.44	1.13	1.13	0.56	1.69	2.13	21

The tabular dimensions and weights are approximate and are not binding.
Design improvements may result in variation from the published figures and verification is recommended.