Click here to view an Adobe print preview...

    

Plastic

3" pitch Pintle chains
Drawing 239

239 - 3 PITCH

CHAIN PITCH ALLOW. U.T.S. PIN  SIDEBAR    
NO.   LOAD   DIA. DEPTH    
  P     D A B X
3" PITCH 3.000   4,350 0.44 1.26 1.26 2.52

CC600 Plain chain
Drawing 243
243 - CC600 PLASTIC

CHAIN PITCH ALLOW. U.T.S. PIN  SIDEBAR     MIN.
NO.   LOAD   DIA. DEPTH     TURN
  P     D A B X RAD.
CC600 2.500 1,850 3,400 0.44 1.13 1.13 1.63 30

Note: Both snap fit and circlip pin styles are available

CC600 Plain chain with S pusher attachment
Drawing 244

244 - CC600 PUSHER

C F T X Z
2.20 3.87 0.38 2.44 0.19

 

CC600 - PUSHER OUT CC600 - PUSHER IN

Attachments facing outwards

Attachments facing inwards

These pusher attachments can be fitted either inwards or outwards, as shown above, and are fitted to the outer faces of the standard CC600 chain, at any interval along its length. It can only be used on straight running acetal chains, utilising an extended circlip pin.

 

CC600 D chain
Drawing 245
245 - CC600D

CHAIN PITCH ALLOW. U.T.S. PIN  SIDEBAR         MIN.
NO.   LOAD   DIA. DEPTH         TURN
  P     D A B T X Z RAD.
CC600D 2.500 1,850 3,400 0.44 1.13 1.13 0.67 1.65 2.12 30

Note: Both snap fit and circlip pin styles are available

CC600 F chain
Drawing 246
246 - CC600F

CHAIN PITCH ALLOW. U.T.S. PIN  SIDEBAR       MIN.
NO.   LOAD   DIA. DEPTH       TURN
  P     D A B X Z RAD.
CC600F 2.500 1,850 3,400 0.44 1.13 1.13 1.62 0.22 30

Note: Both snap fit and circlip pin styles are available

CC600 DB chain
Drawing 247
247 - CC600DB

CHAIN PITCH ALLOW. U.T.S. PIN  SIDEBAR         MIN.
NO.   LOAD   DIA. DEPTH         TURN
  P     D A B T X Z RAD.
CC600DB 2.500 1,850 2,900 0.44 1.14 1.14 0.58 1.69 2.05 30

Note: This chain is supplied with knurled pins only

CC631 D chain
Drawing 248

248 - CC631D

CHAIN PITCH ALLOW. U.T.S. PIN  SIDEBAR         MIN.
NO.   LOAD   DIA. DEPTH         TURN
  P     D A B T X Z RAD.
CC631D 2.500 1,470 2,310 0.44 1.22 1.10 0.66 1.67 2.09 21

Note: this chain is supplied with snap fit pins only

CC1400 plain chain
Drawing 249
249 - CC1400

CHAIN PITCH ALLOW. U.T.S. PIN  SIDEBAR     MIN.
NO.   LOAD   DIA. DEPTH     TURN
  P     D A B X RAD.
CC1400 3.25 2,640 5,000 0.38 1.48 1.48 2.07 26

Note: Both snap fit and rivet pin styles are available

CC1400 Flat top chain
Drawing 252
252 - CC1400 FLAT TOP

CHAIN PITCH ALLOW. U.T.S. PIN  SIDEBAR         MIN.
NO.   LOAD   DIA. DEPTH         TURN
  P     D A B T X Z RAD.
CC1400FT 3.250 2,640 4,300 0.44 1.48 1.48 0.40 2.00 4.88 48

Note: Only snap fit pins are available with this chain

CC1400 D chain angled lug
Drawing 251
251 - CC1400 ANGLE LUG

CHAIN PITCH ALLOW. U.T.S. PIN  SIDEBAR         MIN.
NO.   LOAD   DIA. DEPTH         TURN
  P     D A B T X Z RAD.
CC1400D 3.250 2,640 5,000 0.38 1.48 1.48 0.74 2.07 2.65 26

Note: Both snap fit and rivet pin styles are available

CC1400 D chain square lug
Drawing 250
250 - CC1400 SQUARE LUG

CHAIN PITCH ALLOW. U.T.S. PIN  SIDEBAR         MIN.
NO.   LOAD   DIA. DEPTH         TURN
  P     D A B T X Z RAD.
CC1400D 3.25 2,640 5,000 0.38 1.48 1.48 0.72 2.07 2.65 26

Note: Both snap fit and rivet pin styles are available

1700 chain
Drawing 256
256 - 1700

CHAIN PITCH ALLOW. U.T.S. PIN  SIDEBAR         MIN.
NO.   LOAD   DIA. DEPTH         TURN
  P     D A F T X Z RAD.
1700 1.968 790 1320 0.31 0.94 3.16 0.13 2.15 0.44 5.5

Note: Only snap fit pins are available with this chain

50mm chain
Drawing 253
253 - 50mm PLAIN

CHAIN PITCH ALLOW. U.T.S. PIN  SIDEBAR     MIN.
NO.   LOAD   DIA. DEPTH     TURN
  P     D A F X RAD.
50 mm 1.968 1,320 2,200 0.31 0.98 3.16 2.10 5.50

Note: Both snap fit and knurl pin styles are available

50mm open top chain
Drawing 254
254 - 50mm OPEN TOP

CHAIN PITCH ALLOW. U.T.S. PIN  SIDEBAR     MIN.
NO.   LOAD   DIA. DEPTH     TURN
  P     D A F X RAD.
50 mm 1.968 1,320 2,200 0.31 0.98 3.16 2.10 5.50

Note: Both snap fit and knurl pin styles are available

50mm chain with pusher attachment
Drawing 255
255 - 50mm PUSHER

CHAIN PITCH ALLOW. U.T.S. PIN  SIDEBAR       MIN.
NO.   LOAD   DIA. DEPTH       TURN
  P     D A F X Z RAD.
50 mm 1.968 1,320 2,200 0.31 0.98 3.16 2.10 0.59 5.50

Note: Both snap fit and knurl pin styles are available

½" Pitch straight running chain
Drawing 257
257 - 0.5 PITCH

CHAIN PITCH ALLOW. U.T.S. SIDEBAR BUSH  
NO.   LOAD   DEPTH DIA.  
  P     A B  X
1/2" 0.5     0.44 0.31 0.82

½" Pitch side flexing chain
Drawing 258
258 - 0.5 PITCH

CHAIN PITCH ALLOW. U.T.S. SIDEBAR BUSH    
NO.   LOAD   DEPTH DIA.    
  P     A B  X Z
1/2" 0.5     0.44 0.31 0.82 1.27

Ventilated modular slat chain
Drawing 240
240 - VMS

CHAIN PITCH ALLOW. U.T.S. PIN  SIDEBAR    
NO.   LOAD   DIA. DEPTH    
  P     D A C L
VMS 1.170     0.16 0.62 0.18 6.00

Ventilated modular slat chain with pusher attachment
Drawing 241
241- VMS PUSHER

CHAIN PITCH ALLOW. U.T.S. PIN  SIDEBAR      
NO.   LOAD   DIA. DEPTH      
  P     D A C L X
VMS PUSHER 1.170     0.16 0.62 0.18 6.00 0.92

Note: the straight running VMS slat chain can be arranged to travel in either direction.
These 6" wide modular units, incorporating a 0.16" (4mm) dia. Stainless steel pin, can be joined to produce a maximum total width of 54".

Ventilated modular slat transfer plate
Drawing 242

     
L T X
6.00 0.18 4.92

Click here to view an Adobe print preview...

    

Malleable

CC600/CC625 chain
Drawing 228
228 - CC600

CHAIN PITCH ALLOW. U.T.S. PIN  SIDEBAR     MIN.
NO.   LOAD   DIA. DEPTH     TURN
  P     D A B X RAD.
CC600 2.500 1,500 12,500 0.44 1.13 1.13 1.69 21
CC625 2.520 1,500 12,500 0.44 1.13 1.13 1.69 21

CC600 D chain
Drawing 229
229 - CC600D

CHAIN PITCH ALLOW. U.T.S. PIN  SIDEBAR         MIN.
NO.   LOAD   DIA. DEPTH         TURN
  P     D A B T X Z RAD.
CC600D 2.500 1,500 12,500 0.44 1.13 1.13 0.56 1.69 2.13 21

CC1300 chain
Drawing 230
230 - CC1300

CHAIN PITCH ALLOW. U.T.S. PIN  SIDEBAR     MIN.
NO.   LOAD   DIA. DEPTH     TURN
  P     D A B X RAD.
CC1300 3.25 2,250 24,200 0.56 1.50 1.50 2.00 39

CC1300 D chain
Drawing 231
231 - CC1300D

CHAIN PITCH ALLOW. U.T.S. PIN  SIDEBAR       MIN.
NO.   LOAD   DIA. DEPTH       TURN
  P     D A B X Z RAD.
CC1300D 3.25 2,250 24,200 0.56 1.5 1.5 2 2.56 39

CC400 chain
Drawing 233
233 - CC400

CHAIN PITCH ALLOW. U.T.S. PIN  SIDEBAR   MIN.
NO.   LOAD   DIA. DEPTH   TURN
  P     D A X RAD.
CC400 4.000 2,250 30,000 0.59 1.81 1.53 98

F801 chain
Drawing 232
232 - F801

CHAIN PITCH ALLOW. U.T.S. SIDEBAR   MIN.
NO.   LOAD   DEPTH   TURN
  P     A X RAD.
F801 2.730 1,500 13,200 1.18 1.71  

RD10A chain
Drawing 234
234 - RD10A

CHAIN PITCH ALLOW. U.T.S. PIN  SIDEBAR     MIN.
NO.   LOAD   DIA. DEPTH     TURN
  P     D A B X RAD.
RD10A 3.000   11,000 0.56 1.61 0.63 2.75 18

The tabular dimensions and weights are approximate and are not binding.
Design improvements may result in variation from the published figures and verification is recommended.
 Click here to view an Adobe print preview...