Click here to view an Adobe print preview...

Bakery chains    

CC600 Plain chain
Drawing 243
243 - CC600 PLASTIC

CHAIN PITCH ALLOW. U.T.S. PIN  SIDEBAR     MIN.
NO.   LOAD   DIA. DEPTH     TURN
  P     D A B X RAD.
CC600 2.500 1,850 3,400 0.44 1.13 1.13 1.63 30

Note: Both snap fit and circlip pin styles are available

CC600 Plain chain with S pusher attachment
Drawing 244

244 - CC600 PUSHER

C F T X Z
2.20 3.87 0.38 2.44 0.19

 

CC600 - PUSHER OUT CC600 - PUSHER IN

Attachments facing outwards

Attachments facing inwards

These pusher attachments can be fitted either inwards or outwards, as shown above, and are fitted to the outer faces of the standard CC600 chain, at any interval along its length. It can only be used on straight running acetal chains, utilising an extended circlip pin.

 

CC600 D chain
Drawing 245
245 - CC600D

CHAIN PITCH ALLOW. U.T.S. PIN  SIDEBAR         MIN.
NO.   LOAD   DIA. DEPTH         TURN
  P     D A B T X Z RAD.
CC600D 2.500 1,850 3,400 0.44 1.13 1.13 0.67 1.65 2.12 30

Note: Both snap fit and circlip pin styles are available

CC600 F chain
Drawing 246
246 - CC600F

CHAIN PITCH ALLOW. U.T.S. PIN  SIDEBAR       MIN.
NO.   LOAD   DIA. DEPTH       TURN
  P     D A B X Z RAD.
CC600F 2.500 1,850 3,400 0.44 1.13 1.13 1.62 0.22 30

Note: Both snap fit and circlip pin styles are available

CC600 DB chain
Drawing 247
247 - CC600DB

CHAIN PITCH ALLOW. U.T.S. PIN  SIDEBAR         MIN.
NO.   LOAD   DIA. DEPTH         TURN
  P     D A B T X Z RAD.
CC600DB 2.500 1,850 2,900 0.44 1.14 1.14 0.58 1.69 2.05 30

Note: This chain is supplied with knurled pins only

CC631 D chain
Drawing 248

248 - CC631D

CHAIN PITCH ALLOW. U.T.S. PIN  SIDEBAR         MIN.
NO.   LOAD   DIA. DEPTH         TURN
  P     D A B T X Z RAD.
CC631D 2.500 1,470 2,310 0.44 1.22 1.10 0.66 1.67 2.09 21

Note: this chain is supplied with snap fit pins only

½" Pitch straight running chain
Drawing 257
257 - 0.5 PITCH

CHAIN PITCH ALLOW. U.T.S. SIDEBAR BUSH  
NO.   LOAD   DEPTH DIA.  
  P     A B  X
1/2" 0.5     0.44 0.31 0.82

½" Pitch side flexing chain
Drawing 258
258 - 0.5 PITCH

CHAIN PITCH ALLOW. U.T.S. SIDEBAR BUSH    
NO.   LOAD   DEPTH DIA.    
  P     A B  X Z
1/2" 0.5     0.44 0.31 0.82 1.27

 

Ventilated modular slat chain
Drawing 240
240 - VMS

CHAIN PITCH ALLOW. U.T.S. PIN  SIDEBAR    
NO.   LOAD   DIA. DEPTH    
  P     D A C L
VMS 1.170     0.16 0.62 0.18 6.00

Ventilated modular slat chain with pusher attachment
Drawing 241
241- VMS PUSHER

CHAIN PITCH ALLOW. U.T.S. PIN  SIDEBAR      
NO.   LOAD   DIA. DEPTH      
  P     D A C L X
VMS PUSHER 1.170     0.16 0.62 0.18 6.00 0.92

Note: the straight running VMS slat chain can be arranged to travel in either direction.
These 6" wide modular units, incorporating a 0.16" (4mm) dia. Stainless steel pin, can be joined to produce a maximum total width of 54".

Ventilated modular slat transfer plate
Drawing 242

     
L T X
6.00 0.18 4.92


 

The tabular dimensions and weights are approximate and are not binding.
Design improvements may result in variation from the published figures and verification is recommended.
 Click here to view an Adobe print preview...